J.L. Fisher Jib Arms

Model 23 Sectional Jib
Model 20
Model 21
Model 22
Model 23

Center Mount

The Model 20, 21 and 22 jib arms can be used on all J.L. Fisher camera dollies. The Model 23 can be used on the Model 9 and 10 camera dollies with a center mount. They are smooth, quiet and easy to set up, with the  J.L. Fisher reputation for being well constructed and easily maintained. All jib arms come complete with weight carts, leveling offsets and angle plates.

Model 20 Jib Arm on Model 11 Dolly with Center Mount Model 21 Jib Arm on Model 9 Camera Dolly Model 22 Jib Arm on Model 10 Camera Dolly
Model 20
Model 21
Model 22
Model 23 Sectional Jib on Model 10 Camera Dolly
Can be Built to 7 Lengths
Lengths



Model 20, 21 & 22 FEATURES

Model 20, 21 and 22 Jib Arms share these features:

  • Quick Setup
  • Mitchell mounts
  • Weight carts included
  • Weight box can be inverted
  • Weatherproof
  • Ultra Smooth Pan & Tilt


    Standard Accessories
  • Leveling 12" offset
  • Angle plate
  • Detachable weight box
  • 27 large weights 12.5 pounds each
  • 4 small weights 4 pounds each
  • Platewasher, handscrew and allen wrench
  • Riser nut
  • Weight carts
Jib Weight Carts
Jib Arm Weight Carts
  • Front end is submersible
  • Movable counterweight
  • Adjustable Drag Pan & Tilt
  • 4 Position Angle Plate
  • 12 in Leveling Offset
  • Balance Ratio 2:1


    Optional Accessories
  • Baby angle plate for use with riser
  • 12", 18", 24" or 36" riser or dropdown
  • 1 1/8" light pin adapter
  • Extended angle plate
  • 150mm claw ball adapter
  • Extra weights
  • European adapter
  • J.L. Fisher Crossarms
36 inch Riser
36 in Riser

Model 20 Jib Arm with CRA4 Crossarm
Model 20 Jib Arm
with CRA4 Crossarm


Model 20, 21 & 22 SPECIFICATIONS

Maximum Payloads are calculated from the center line of the Mitchell mount on the leveling offset (LOF)

Jib Arm Specifications


Model 20, 21 & 22 DIMENSIONS

Jib Arm Dimensions

Model 20, 21 & 22 ACCESSORIES

Jib Arm Accessories


Model 23 SECTIONAL JIB ARM
QUICK - LIGHTWEIGHT - PORTABLE

Model 23 Jib Arm

The Model 23 Jib is a stable, yet lightweight sectional arm used for Features, Television, Commercials, Infomercials, Music Videos, and Live Productions. The Jib sections are ergonomic, easy to handle and assemble quickly. Color-coded, pre-tensioned cables secure the assembled sections into an extremely rigid Jib. The Model 23 Jib rotates 360 degrees and enables the operator to position the camera at various elevations from –9 ft. to 19 feet high.

For use only with Model 9 & 10 Dollies with Center Mount and 18" HD Riser.
Not for use with Model 11 Dolly.


  • The Model 23 Jib sections, cables and parts store conveniently in compartments in a self-contained utility cart.
  • Four weight carts are provided for easy transportation of weights and other accessories.
  • The Jib can be configured in 3 foot increments from 6’ (1.83m) to 21’ (6.4m).
  • Support cables are pre-adjusted to the proper length and color coded for easy assembly.
Utility Cart
Utility Cart conveniently stores all Jib parts


THE MODEL 23 JIB CAN BE BUILT OUT TO 21 FEET IN 10 MINUTES

 Fast, easy assembly    Fast, easy assembly    Fast, easy assembly
Model 23 animation

Model 23 Jib Info


Model 23 SPECIFICATIONS

Model 23 Chart

Model 23 DIMENSIONS

Model 23 Dimensions

CENTER MOUNT

Using the Cener Mount

CENTER MOUNT DIMENSIONS

Center Mount Dimensions





J.L. Fisher, Inc.  Motion Picture & Television Equipment
1000 Isabel Street, Burbank, CA 91506  U.S.A.   Tel: (818) 846-8366 / Fax: (818) 846-8699
Web: www.jlfisher.com  e-mail: info@jlfisher.com

J.L. Fisher, GmbH  Emil-Hoffmann-Str. 55-59  50996  Köln, Germany
Tel: +49 2236 3922 0       Fax: +49 2236 3922 12
Web: www.jlfisher.de      e-mail: info@jlfisher.de